论文部分内容阅读
保养、检修调节器后,应在试验台上对其进行调整。如无试验台,可按下图所示自制简易设备。 1.电动机 2.发电机 3.调节器 4.电流表 5.电压表 R_1——调压电阻 R_2——负荷电阻K_1——单档开关K_2——单档开关调整调节器的简易设备 1.规格电动机为600瓦,三角皮带轮直径大小以使发电机转速达2800~3000转/分而定,直流发电机为220瓦,调节器为12伏/18安(或直流发电机为150瓦,调节器为12伏/13安),直流电流表为±30安,直流电压表为30伏,调压电阻R_1为50欧姆/150瓦的可变电阻,负荷电阻R_2为2欧姆/800瓦的可变电阻。
Maintenance, repair regulator, the test bench should be adjusted. If no test bench, as shown below can be made of simple equipment. 1. Motor 2. Generator 3. Regulator 4. Current meter 5. Voltmeter R_1 - Surge resistor R_2 - Load resistance K_1 - Single-gang switch K_2 - Single-gang switch to adjust the regulator of the simple equipment 1. Specifications The motor is 600 watts and the diameter of the V-belt pulley is set so that the generator speed is up to 2800 to 3000 rpm. The DC generator is 220 watts and the regulator is 12 volts / 18 amperes (or the DC generator is 150 watts. The regulator 12 volts / 13 amps), a DC ammeter of ± 30 A, a DC voltmeter of 30 V, a surge resistor R_1 of 50 ohm / 150 watt variable resistance, a load resistor R_2 of 2 ohm / 800 watt variable resistance .