X62W铣床的快速移动是由电磁铁通过杠杆吸动进给变速箱内的离合器来实现的。由于电磁铁使用时有相当大的冲击力,又因吸铁行程及拼帽限位的调节也不够方便,使用时往往会出现不少毛病,不得不经常拆机修理。其常见的故障有: (1) 动作失灵。有时快进离合器啮合不上,直打滑;有时快进离合器又脱不开。 (2) 离合器爪部很容易打坏。在日常维修中,这 X62W milling machine’s rapid movement by the electromagnet through the lever sucked into the gearbox clutch to achieve. As the use of electromagnet has a considerable impact, but also due to suction iron stroke and the cap limit adjustment is not convenient enough, there will often be many problems when using, often have to disassemble repair. The common faults are: (1) action failure. Sometimes the fast clutch does not engage, slipping; sometimes fast forward clutch and can not be separated. (2) clutch claw is very easy to damage. In routine maintenance, this