感应加热炉的设计 本加热炉为连续式。在炉内装有一排感应器,坯料(坯料尺寸见图1)平放,通过一排感应器逐次地提高到锻造所需的温度。进料装置将坯料送入加热炉。在感应线圈之间排列着辊子,在马达的驱动下,坯料以匀速移动通过感应器。加热功率和辊速可调节,产品的恒定加热温度可以得到保证。两辊之间的中心线距离为737mm,所以输送的坯料最小长度是 Induction heating furnace design The heating furnace is continuous. In the furnace with a row of sensors, blank (blank size shown in Figure 1) flat, through a row of sensors, one by one to raise the temperature required for forging. The feed device feeds the billet into the furnace. Rollers are arranged between the induction coils and are driven by the motor to move the billet through the sensor at a constant speed. Heating power and roller speed can be adjusted, the product of the constant heating temperature can be guaranteed. The centerline distance between the two rollers is 737 mm, so the minimum length of stock conveyed is