论文部分内容阅读
借助于 Mannesmann 多功能测试仪,三种测量和试验相结合的系统已经问世,并在管材测试中同时应用,最后结果是一张凑在一起的试验报告。当管子被送到纵向滚筒传送带上时,用光学二极管线路摄像系统测定管径,而不接触管子的表面。此外,用非连结式超声波发生器测量壁厚,用环形超声波测试整个管子圆周的不均匀性,当然也不需要接触。采集的所有数据通过一套高级计算系统进行分析,并可在监视器上显示或者打印出来。自
With the help of the Mannesmann Multifunction Tester, a combination of three measurement and test systems has been introduced and applied simultaneously in the pipe test, with the result that a test report is put together. When the tube is fed to a longitudinal drum conveyor, the optical diode line camera system determines the tube diameter without touching the surface of the tube. In addition, the wall thickness is measured with a non-connected ultrasonic generator, the circumferential uniformity of the entire pipe is measured with a ring-shaped ultrasonic wave, and certainly no contact is required. All collected data is analyzed by an advanced computing system and displayed on the monitor or printed. from