论文部分内容阅读
3吨爐料称量車可用于产量为7.5～20吨/小时的冲天爐,其外形見上图。称量車的外形尺寸为4156×1800×1700毫米,重量约为3吨,轨距采用1435毫米标准轨距,称量車由車架(底盘)、料斗及其开关、计量系統、行走机构四部分組成,茲分述于后。 1.車架車架长4165毫米,寬1746毫米,用24号槽鋼作主梁,10号槽鋼作副梁。車架主梁上焊有四根立柱以承托料斗(立柱用10号工字鋼),并用斜撑以增加料斗的稳定性。 2.料斗及其开关料斗用8毫米厚的鋼板焊成,容积1.5立方米,上口尺寸2100×1700毫米,卸料孔尺寸1000×800毫米。料斗壁有加强筋。卸料时,称
The 3 ton charge weighing car can be used in a cupola with a capacity of 7.5 to 20 tons/hour. The shape is shown in the figure above. Weighing car’s dimensions are 4156×1800×1700mm, weight is about 3 tons, track gauge adopts standard track gauge of 1435mm, weighing vehicle consists of frame (chassis), hopper and its switch, measuring system, and walking mechanism. Part of the composition is described later. 1. The frame of the frame is 4165 mm long and 1746 mm wide. The 24th channel steel is used as the main beam and the 10th channel is used as the auxiliary beam. Four pillars are welded on the main frame of the frame to support the hopper (10-beam I-beam for the column), and diagonal braces are used to increase the stability of the hopper. 2. The hopper and its switch hopper are welded with 8mm thick steel plates, the volume is 1.5 cubic meters, the upper mouth size is 2100×1700mm, and the discharge hole size is 1000×800mm. The hopper wall has ribs. When unloading, say