论文部分内容阅读
(一)传统方法1.手工法:在药匾内撒入少量冷开水使匾内均匀湿润,随即撒入少量药粉,双手持匾转动,使药粉湿润,用干燥棕刷将药粉刷离。由于具有粘性而形成小颗粒,经过加水、上粉等操作,制成圆形细小颗粒,经筛选即成丸模。2.机械法:利用包衣锅代替药匾泛丸,其操作步骤与手工法相同。(二)改进方法制粒起模法:将药粉用适量凉开水充分混合至“握之成团、触之即散”的软材后,选用14目筛制成干燥颗粒,选取均匀的颗粒置入包衣锅內,转动机器,喷入少量水,加入适量药粉,经反复操作一次性制成所需要大小的泛丸,经干燥选粒后即为正品。此法易于掌握、省工时、不浪费药物、减少污染,是较理想的起模方法。
(A) the traditional method 1. Manual method: In the medicine pot, sprinkle a small amount of cold water to make the pot evenly moist, then sprinkle a small amount of powder, turn the two hands to make the powder wet, use a dry brown brush to brush off the powder. Due to the stickiness and the formation of small particles, after the operation of adding water, adding powder, etc., round fine particles are made, and they are selected and pelletized. 2. Mechanical method: using a coating pan instead of Yaoji Pan Pill, the operation steps are the same as the manual method. (II) Improved method: Granulation method: The powder is mixed thoroughly with a suitable amount of cool boiled water until the soft material “grip into a mass and touch is loose”, then a 14-mesh sieve is used to make the dry particles, and the uniform particles are selected. Into the coating pan, turn the machine, spray a small amount of water, add the right amount of powder, after repeated operation to make a pan-size pill of the required size, after the dry granulation is genuine. This method is easy to master, save labor hours, do not waste drugs, reduce pollution, is an ideal way to die.