论文部分内容阅读
一、前言本文论述了200×600×60毫米矩形板状红外线辐射器的研制情况。该辐射器的正面为辐射涂层,背面为红外线炉的外壁,当辐射涂层保持1000℃的高温时,作为外壁的背面只有60℃。该辐射器在电压95伏、功率30千瓦时标准使用温度1000℃,最高使用温度可达1250℃。如果将该辐射器的辐射面与被加热面相对安装,即可进行辐射加热。如大型辊的退火处理,是把该辐射器安装在辊子的四周,组成快速辐射电炉、组合式电炉。该辐射器最大额
First, the preface This article discusses the 200 × 600 × 60 mm rectangular plate-shaped infrared radiator research and development. The front of the radiator is a radiant coating and the back is the outer wall of an infrared furnace. When the radiant coating maintains a high temperature of 1000 ° C, the rear of the radiator is only 60 ° C. The radiator at a voltage of 95 volts, the standard power of 30 kWh temperature 1000 ℃, the maximum temperature up to 1250 ℃. Radiation heating can be performed if the radiating surface of the radiator is mounted opposite the heated surface. Such as large-scale roll annealing, the radiator is installed around the roller to form a rapid radiation furnace, modular electric furnace. The maximum amount of the radiator