【摘 要】
：
We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means.First,the thermal simulation experiments for pure titanium TA1 were carried out to investigate the
【机 构】
：
College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China;National Engineerin
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means.First,the thermal simulation experiments for pure titanium TA1 were carried out to investigate the hot deformation behaviors of pure titanium in the temperature range of 700-800 ℃ with strain rate range of 1-20 S-1,and the processing map was established to determine optimized deformation parameters.Then,the finite element model has been constructed and used to analyze the effect of process parameters on the direction and severity of head curvature of pure titanium sheet.The process parameters considered in the present study include workpiece temperature,work roll diameter,pass reduction,oxide scale thickness of workpiece surface,and interface friction coefficient.The simulation results show that the workpiece temperature and the interface friction coefficient are the two main factors.The proposed controlling means was carried out on a hot rolling production line and solved the head curvature problem effectively.The rolling practices indicate that the rolling yield is improved greatly.
其他文献
We investigated the temperature dependency of the dynamic mechanical properties of cement asphalt paste by the dynamic mechanical thermal analysis (DMTA) method. The experimental results show that the dynamic mechanical properties of cement asphalt pastes
The objective of this work was to study the properties of bamboo charcoal and cement-based composite materials and their microstructure. The pastes with various bamboo charcoals were prepared and the relative properties such as setting times and strength
Thermal energy storage is an attractive option for effectiveness since it gives lfexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3 composite materials were synthesized by one-
This work mainly involved the preparation of a nano-scale form-stable phase change material (PCM) consisting of capric and myristic acid (CA-MA) binary eutectic acting as thermal absorbing material and nano silicon dioxide (nano-SiO2) serving as the suppo
Micro compression and micro extrusion experiments of ultrafine grained titanium cylindrical specimens in diameters of 4,2,and 1 mm prepared by equal channel angular pressing (ECAP) were conducted on the micro plastic forming test machine.The effects of sp
Diblock copolymers polystyrene-block-polyvinyltriethoxysilane (PS-b-PVTES) were synthesized via atom transfer radical polymerization (ATRP), which self-assembled into spherical micelles in solvent of THF-methanol mixtures. The self-assembled micelles were
Indium doped ZnO films were grown on quartz glass substrates by radio frequency magnetron sputtering from powder targets. Indium content in the targets varied from 1at% to 9at%. In doping on the structure, optical and electrical properties of ZnO thin fil
The dispersion ability of polycarboxylate superplasticizer (PCE) in fresh concrete was much impeded by clay impurities. To improve the dispersion of PCE in the clay-contained concrete, a novel PCE with carboxyl as a specific branched chain terminal group
Hydraulic characteristic is a good indication of binder hydration,which determines the strength development of cemented paste backfill (CPB).Therefore,the hydraulic characteristic should be communicated with the mechanical property to provide an advanced