【摘 要】
：
Thermal energy storage is an attractive option for effectiveness since it gives lfexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3 composite materials were synthesized by one-
【机 构】
：
State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Thermal energy storage is an attractive option for effectiveness since it gives lfexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3 composite materials were synthesized by one-step synthesis method. The chemical composition, morphology, structure, and thermal properties were investigated by XRD, EDS, SEM, and DSC. The results show that NaCl can be absorbed by Al2O3 particle from 800 to 900℃ for Al2O3 particle surface is rich active structure. The results also indicate that the leakage of NaCl when the phase change can be prevented by Al2O3 particles and the enthalpy of phase change of NaCl-Al2O3 material is 362 J/g. The composites have an excellent heat storage capacity. Therefore, this study contributes to one new thought and method to prepare high temperature heat storage material and this material can be applied in future thermal engineering.
其他文献
Octahedral CoO with nanostructures decorated with Ag nanoparticles was prepared via a facile solvothermal approach.After being annealed at 500 ℃ for 1 h,an electrochemical capacitor material of Co3O4 decorated with Ag2O was obtained.The cyclic voltammetry
Novel organic-inorganic composites were in-situ synthesized by using TriSilanolPhenyl polyhedral oligomeric silsesquioxane (SO-POSS) as fillers and poly(2,5-benzimidazole) (ABPBI) as polymer matrix. The uniformly dispersed 3％ SO-POSS particles in ABPBI ma
Powder in tube process (PIT) was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment (HT1), intermediate rolling (IR), and second heat treatment (HT2) was performed. The phase evolu
The atomic geometry,structure stability,electronic and magnetic properties of VSe2 were systematically investigated based on the density functional theory (DFT).Varying from 3D to 2D four VSe2 structures,bulk 2H-VSe2 and 1T-VSev monolayer H-VSe2 and T-VSe
Ag-Pt bimetallic nanoparticles decorated on MWCNTs/PANI nanocomposites have been synthesized by in-situ chemical oxidative polymerization and chemical co-reduction method.The Fourier transform infrared(FT-IR)spectroscopy,X-ray diffraction(XRD),ultraviolet
Due to the largely inhomogeneous deformation among constituent phases, the advanced high-strength multi-phase steels are always facing challenges when applied to automotive parts where local formability is critically required. In this work, two characteri
We investigated the temperature dependency of the dynamic mechanical properties of cement asphalt paste by the dynamic mechanical thermal analysis (DMTA) method. The experimental results show that the dynamic mechanical properties of cement asphalt pastes
The objective of this work was to study the properties of bamboo charcoal and cement-based composite materials and their microstructure. The pastes with various bamboo charcoals were prepared and the relative properties such as setting times and strength