1.灵活掌握油门的开启程度 按使用说明书的提示,收割机作业时使用大油门,但由于作业环境不同,在操作过程中应灵活控制油门。油门的大、小都会影响切割速度,正常情况下可以使用大油门,以获得较大的切割速度。但是必须注意,过大的切割速度会使动力架产生较大的惯性,引起割台剧烈振动,造成相关零部件松动或断裂。 1. Flexibility to grasp the degree of opening the throttle Press the instruction manual, harvester operation using a large throttle, but due to different operating environment, the operation should be flexible control of the throttle. Large and small throttle will affect the cutting speed, under normal circumstances can use a large throttle to get a larger cutting speed. However, it must be noted that excessive cutting speed will cause greater inertia of the power stand, causing severe vibration of the header, resulting in loose or broken parts.