最近,笔者学习了几份电力系统内发生的各类事故通报,发现事故大都是在电力线路架设、变电设备检修等施工过程中发生的,分析原因且都是个别施工人员思想麻痹,违章作业导致的。像这类人为事故在其他行业也有发生。所以,笔者认为要想切实搞好安全生产,关键还是要从强化“现场”安全监察工作这个根本问题入手。 众所周知,目前不少单位在抓安全生产工作中,仅习惯于开开安全会议、发发安全文件、学学事故通报等面上例行工作。长此以往,既形成了单位安全管理工作上的形式主义,同时由于安全工作抓得浮而不实,也给单位安全生产留下了事故隐患。加强对“现场”的安全监察工作,就能更好地把安全工作抓到点上,落到实处。为此,笔者 Recently, I learned a few reports of various incidents that occurred in the power system and found that most of the incidents occurred in the construction of power lines and maintenance of substation equipment. The reasons for the analysis were that all constructors were paralyzed and violated the regulations Cause Such as man-made accidents in other industries have also occurred. Therefore, the author believes that in order to effectively improve safety in production, the key point is to start with the fundamental issue of strengthening “on-site” safety inspection. As everybody knows, at present, quite a few units are accustomed to routine work in areas such as safety meetings, issuance of safety documents and notification of school accidents in their work safety work. Over the long term, not only formalism in the work of unit safety management has been formed, but accidents in the work safety of the units have also been left hidden by the safety work. To strengthen safety inspection on “the spot” can better grasp the safety work and implement it. To this end, the author