我看了本刊今年第3期关于高压油管接头断裂的简易修理,这个方法很好。但是,这种方法需要有车床才能进行。若没有车床,可用下述方法修理: 先把断下来的管接头用手钳修平,再放在手摇钻上按照高压油管的直径在管接头上钻眼,但要防止把管接头钻透。然后把管接头拧在管子上,用铜焊好。焊完后用嘴吹一下,检查管路有无阻塞现象,若无即可使用。我们觉得这种办法简单、方便, I read this issue of the third issue of this year on the simple high-pressure pipe fittings fracture repair, this method is very good. However, this method requires a lathe to work. If there is no lathe, the following methods can be used to repair: First, the broken pipe fittings with hand pliers flattened, and then placed on the hand drill in accordance with the diameter of the high-pressure tubing in the pipe fittings on the drill, but to prevent the pipe fittings drilled. Then screw the pipe fitting on the pipe and use brazing. Blow with the mouth after welding, check the pipeline is blocked, if you can not use. We think this approach is simple and convenient,