论文部分内容阅读
我单位承建的驻马店百货楼工程,柱子及门套设计为镶贴预制水磨石块,面积达650平方米,根据工程情况,我们对传统的施工方法做了改进,效果较好。具体施工方法如下。首先,根据图纸的要求,用一般方法先贴柱最下面一层的水磨石块,待粘贴砂浆有一定强度后,立设钢模板带或60×60方木,长度根据柱子高度确定,见图1、2,将钢模板带下面紧靠第一层磨石块上面,每隔1米用小木块做一临时支撑,待粘贴至木块位置时去掉,钢模板带沿柱上下每面立2根。用线坠吊直找平后,
The department store building project of Zhumadian that our company undertook was designed as a prefabricated terrazzo block with an area of 650 square meters. According to the engineering situation, we improved the traditional construction method and achieved better results. The specific construction method is as follows. First of all, according to the requirements of the drawings, the terrazzo blocks of the bottom layer of the column are first attached by general methods. After the mortar has a certain strength, a steel template strip or 60×60 square wood is erected. The length is determined according to the height of the column. See Figure 1 , 2, the steel template with the top next to the first layer of grindstone block above, every 1 m with a small wooden block to do a temporary support, to be removed when the paste to the location of the block, steel template strip along the upper and lower sides of the column 2 . After leveling with a wire drop,