我们常看到有些机床上用的刀具,切削轻快,导屑稳定或断屑良好,迫切希望知道其特点、断屑槽型。经测绘仿制后,扩大使用。新设计的刀片经过生产验证,能达到断屑等予期效果。据此,设计压模,定型生产。制造压模时,也要检查其形状是否符合图纸要求。经过分析研究和生产验证,认为可取的国外刀片,有复制生产的必要,也应测绘刀片图形。做断屑比较试验,首先应该知道刀片的几何参数与断屑槽型。总之,测绘工作对上述各 We often see some of the tools used on machine tools, cutting light, chip guide stability or broken chips good, eager to know the characteristics of chipbreaker type. After mapping imitation, to expand the use of. New design of the blade after production verification, can achieve the expected effect such as chip breaking. Accordingly, design die, stereotypes production. When making stampers, check that the shape meets the drawing requirements. After analysis and production and verification, that the desirable foreign blade, the need for copy production, but also the mapping blade graphics. Do chip breaking comparison test, first of all you should know the geometry of the blade and chipbreaker type. In short, mapping work on the above