我们高频小组制做了图示的可挠水冷同心高频电缆,可使高频电源在一定距离的输送,便于机床导轨等大型零件的淬火,现将制做方法介绍如下:1.用5毫米厚的紫铜板制成两块导电夹板,分别与内进接头管2和外进接头管3(均由φ13×9毫米的紫铜管制成)用铜焊焊牢;2.将70股φ1毫米,长3米的漆包线并成一梱组成内极导电线4,并将漆包线两端30毫米处去漆砂光,用锡焊将 Our high-frequency group system made a flexible cable water concentric high-frequency cable illustrated, high-frequency power supply can be transported at a distance to facilitate the quenching of large parts such as machine rails, the system is now made as follows: 1. With 5 Mm thick copper plate made of two conductive splint, respectively, with the inlet pipe 2 and the inlet pipe 3 (both by φ13 × 9 mm made of copper) with brazing; 2 will be 70 shares φ1 mm , 3 meters long enameled wire and made up of a very internal conductive wire 4, and enameled wire at both ends of 30 mm to sanding, soldering