近几年来,我场在开展木材节约代用,降低木材消耗方面做了一些工作,取得了较好成绩。我们的做法主要是: 一、改革制胶工艺,以电代柴我场是一个以生产橡胶为主业的国营农场。在橡胶生产中,要把胶乳制成固体胶初制品(如烟胶片、标准胶),需要耗费大量的燃料。过去,我们用于干燥烟胶片的能源主要是木柴。由于能源利用率低,干燥周期长,木柴的消耗量大。据1976年统计资料,当年生产干胶,每吨耗柴量为1.16立方米。七十年代末,我场年产干胶1000多吨,年耗木柴达1600立方米左右。用木柴干燥胶片,既费时、费力,义破坏了森林资源,对生态、社会、经济效益都有影响。进入八十年代,随着水电资源的开发、利用,我场狠抓了以电代柴干燥橡胶这一环。开始并不顺利,但经过反复试验,电热干燥标准胶终于获得成 In recent years, my field has done some work in wood conservation, reducing wood consumption, and achieved good results. Our approach is mainly: First, the reform of plastic technology to electricity on behalf of the wood I is a production of rubber-based state-owned farms. In rubber production, it is necessary to make the latex into a solid plastic primary product (such as a cigarette film and a standard glue), which consumes a large amount of fuel. In the past, the energy we used to dry tobacco films was mostly firewood. Due to low energy efficiency, long drying cycle and high consumption of firewood. According to the statistics of 1976, when the production of glue, the amount of firewood per ton was 1.16 cubic meters. The late seventies, I field annual dry glue more than 1,000 tons, annual consumption of firewood up to 1600 cubic meters. Drying film with firewood is both time-consuming and labor-intensive, meaning that forest resources are destroyed, affecting both ecological, social and economic benefits. Into the eighties, with the development and utilization of hydropower resources, I pay close attention to the field of electricity on behalf of Chai dry rubber ring. The beginning is not smooth, but after repeated tests, electric drying standard glue finally obtained