Denitration Performance of Modiifed AC Loaded with Nano V2O5 with Different Morphologies

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:xiexiangjun
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A series of V2O5 with various morphologies was prepared by the hydrothermal method and loaded on the modified active coke (AC) which was prepared by the impregnation methods. The prepared samples were characterized by BET, Boehm titration test, XRD, SEM and EDS. The SEM exhibited that the morphologies of the samples prepared were signiifcantly different from each other. Then the samples prepared were studied on the selective catalytic reduction (SCR) of NO with ammonia in the presence of oxygen. The SCR activity measurements were undertaken in a fixed-bed unit with a sieve plate in the middle. From the contrastive experiments, the results showed that linear V2O5/AC had the best denitration performance and the denitration rate was up to 57.41%. It was speculated that the linear V2O5 with the crystal faces (110) may show the best performance in SCR. And the durability results also showed that linear V2O5/AC produced a denitration rate of 47.7%after three regenerations.
其他文献
The physical properties, the pre-reacting performance and melting properties of the loose glass batch and the granulated glass batch were investigated, respectively. The experimental results showed that compacted glass batch could reduce dust, use ultra-f
Three types of pure geopolymer pastes (poly-sialate PS, poly- sialate-siloxo PSS, and poly-sialate-siloxo PSDS) werefi rst prepared by alkali (NaOH and KOH) activated metakaolin. Then a void space network was employed to simulate the 3-D pore-throat distr
Experimental investigations on mechanical property and durability of sulphoaluminate cement concrete with aggregate gradations according to Fuller distribution are presented in this paper. Compressive strength, water impermeability and resistance capabili
In-service structural health monitoring (SHM) technologies are critical for the utilization of composite aircraft structures. We developed a Lamb wave-based in-service SHM technology using built-in piezoelectric actuator/sensor networks to monitor delamin
The aim of the present study was to investigate the influence of heavy metals on the polymorph transformation of tricalcium silicate. Heavy metal (0.1wt% to 3.0wt%) of Cr, Zn, Cu, Ni and Pb (in oxides form) was added into the raw mixtures and then sintere
Combined with DTG analysis, X-Ray diffraction analysis (XRD) andfi eld emission scanning electron microscopy analysis (FSEM) affi liated with energy dispersive spectrometer analysis (EDS), the early hydration and carbonation behavior of cement paste compa