论文部分内容阅读
冶金部钢铁研究总院与有关单位研制成功的UC-650轧机于1990年“十一”前投产。这套轧机是在HC轧机基础上改进和发展的新型板带轧机,它比HC轧机具有更强的板形控制能力,有中间反弯系统,可控制复合板,工作辊径小,压下率大,适合轧制薄、硬、宽的高精度带钢。UC—650轧机辊系尺寸为165/190/500×650mm,轧制速度0.4~3.5m/s,轧制规格为0.2~1.2×300~520mm,卷径为500/1500mm,最大卷重6.5t。生产实践表明,轧机的设
Ministry of Metallurgical Iron and Steel Research Institute and the successful development of the relevant units UC-650 mill in 1990, “11” before commissioning. The mill is a new type of strip rolling mill based on the improvement and development of the HC rolling mill. It has a stronger shape control capability than the HC rolling mill, with an intermediate bending system, a controllable composite plate, a small work roll diameter and a reduction ratio Large, suitable for rolling thin, hard, wide high-precision strip. The roll size of UC-650 mill is 165/190/500 × 650mm, the rolling speed is 0.4 ~ 3.5m / s, the rolling specification is 0.2 ~ 1.2 × 300 ~ 520mm, the winding diameter is 500 / 1500mm and the maximum roll weight is 6.5t . Production practice shows that the mill set up