Treatment of fir wood with chitosan and polyethylene glycol

来源 :Journal of Forestry Research | 被引量 : 0次 | 上传用户:awii0813
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Chitosan is a natural biopolymer, derived from chitin, which is used for wood modification. Polyethylene glycol(PEG) was reacted with wood to provide possible fixation of the chitosan to wood. Wood blocks were treated with chitosan and PEG, as well as pre-treatment with the PEG at different temperatures and further reaction with the chitosan. The samples were soaked in water to study leaching of the chemicals, water absorption, swelling, as well as anti-swelling efficiency. Any prior reaction of the wood with PEG provided better reaction to the chitosan.Bulking was increased after the treatment of the wood with PEG. Swelling was reduced in the PEG-treated wood blocks as well as the pre-treated samples. Chitosan was not able to protect wood against water penetration: the treated samples showed more water absorption and swelling.However, pre-treatment of the samples decreased swelling in the wood, and the density was not noticeably affected by the treatments. Heating during the treatment caused more reduction in swelling for PEG–chitosan treated samples. Chitosan is a natural biopolymer, derived from chitin, which is used for wood modification. Polyethylene glycol (PEG) was reacted with wood to provide possible fixation of the chitosan to wood. Wood blocks were treated with chitosan and PEG, as well as pre- treatment with the PEG at different temperatures and further reaction with the chitosan. The samples were soaked in water to study leaching of the chemicals, water absorption, swelling, as well as anti-swelling efficiency. Any prior reaction of the wood with PEG provided better reaction to the chitosan.Bulking was increased after the treatment of the wood with PEG. Swelling was reduced in the PEG-treated wood blocks as well as the pre-treated samples. Chitosan was not able to protect wood against water penetration: the treated samples showed more water absorption and swelling. Before-treatment of the samples decreased swelling in the wood, and the density was not noticeably affected by the treatments. Heating during the treatment caused more reduction in swelling for PEG-chitosan treated samples.
其他文献
本文研制了高导热低损耗的AlN陶瓷,制备的AlN陶瓷介电常数8.4,损耗角正切5×l0-4,常温热导率为186W/(m·K);同时研制出了热导率为192W/(m·K)的氮化铝陶瓷.完成了AlN的陶瓷-
商品混凝土的品质一直是商混企业安身立命,打开市场,占有一席之地的根本,加之国家标准的细化、政府监督检查力度的加大、工程质量要求不断提高等,故品质的控制与保证已被提到
利用图像信息获取战场三维几何数据。以装甲车为实例,提出适用的平面二次曲线获取方法,可以克服模糊背景的干扰,得到完整的轮廓曲线,并在此基础上求解了空间曲线三维数据。研究结果表明:通过对摄影图像的标定、建模,可以获得战场环境中关注目标的三维几何数据,并且投影矩阵值和提取轮廓准确性对误差影响较大。
研究DCS对瓦楞原纸造纸湿部及成纸强度的影响。结果表明,随DCS中Mg2+、Na+、Ca2+浓度增加,电导率显著上升,Zeta电位和滤水性变化不大,阳离子需求量先下降后趋于平稳,留着率缓
We collected acorns from selected Quercus robur and Quercus petraea mother trees growing at stations with different depths to the water table.We produced pairs
四月维夏,五月鸣蜩,风眠林盛,草木葳蕤.rn在这春夏交替、万物应时的季节,郑州市规划勘测设计研究院迎来了建院三十周年华诞.rn三十年寒暑,三十载峥嵘,随着一轮轮城市总体规划
微波加热作为一种新型加热方式,具有高效性、穿透性、选择性和环境友好等优点,在工业加热领域受到广泛的应用和研究.但在实际的工业生产应用中,微波加热存在着加热效率急剧下
工程量清单计价方法升华了工程造价的控制方式,有效提高了各项资金的利用率,降低了工程整体造价的成本,是现代工程造价与管理的最佳计价途径。本文从工程量清单计价的基本概
郑州市规划勘测设计研究院始建于1 984年,现为河南省唯一一家拥有城市规划、工程测量(测绘)、建筑、工程咨询四项甲级资质的综合性设计单位,另有市政设计、工程勘察乙级资质,
本文详细叙述了抽除可凝性气体时所利用的两种抽气设备,即气镇泵与冷凝器。首先介绍了可凝性气体的形成、饱和状态、汽化与凝结。讨论了油封机械泵抽除可凝性气体对泵性能所