本文论述了多根钢绞线夹片式锚具的试验与数值研究。确定试验程序并给出有关试验信息 ,如锚具的挠度和沿锚具外周表面的应变分布。但是试验程序不能提供锚具内部信息 ,如内部应力———应变分布 ,应力集中及屈服百分比。给出一种有效的数值有限元模型分析方法 ,这种模型能够提供上述内在信息。模型包括所有运动学 材料 接触非线性单元 ,并首次利用试验数据加以校准。最后 ,完成了锚具的数值研究并检验了其在不同荷载条件下的特性。特别论述了不同使用方面的问题 ,如应用高强钢绞线等 This paper discusses the experimental and numerical studies of multiple strand clip anchors. Determine the test procedure and give information about the test, such as the deflection of the anchorage and the strain distribution along the peripheral surface of the anchorage. However, the test program does not provide internal information on anchors, such as internal stress - strain distribution, stress concentration and yield percentage. An effective numerical finite element model analysis method is given, which can provide the above intrinsic information. The model includes all kinematic materials that touch non-linear elements and are first calibrated using test data. Finally, the numerical study of the anchorage was completed and its characteristics under different loading conditions were tested. In particular, the use of different aspects of the issue, such as the application of high-strength steel wire and so on