新型白银炉炉体砌筑八字脚改造生产实践

来源 :甘肃冶金 | 被引量 : 0次 | 上传用户:zhangyong131420
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
“白银炉”是20世纪70年代白银公司自主研发出的具有独立知识产权的硫化铜精矿双侧吹熔炼炉.它是从反射炉发展起来的一种侧吹式固定床熔炼炉,可直接将硫化铜精矿等炉料投入熔池进行造锍熔炼.历经多次改造,各项技术经济指标逐步完善,趋于成熟,但通过多年的生产实践表明,新型白银炉熔炼区热修、挖补频次多,影响作业率.本次改造通过研究论证、调整并优化生产工艺参数、炉体砌筑改造等技术手段,白银熔池熔炼技术指标较以往相比均取得突破.
其他文献
根据矿山贫化率、损失率指标的定义、计算方法,分析矿山贫损产生的原因.结合矿山三维建模技术,提出贫损指标计算的关键参数的获取途径,即从空区探测技术(CMS)出发,对矿山贫损指标的计算与管理进行探讨,从而有效解决矿山贫损指标难以监测的难题.
Reliable modeling of river sediments transport is important as it is a defining factor of the economic viability of dams,the durability of hydroelectric-equipment,river susceptibility to pollution,suitability for navigation,and potential for aesthetics an
Streams and rivers,particularly smaller ones,often do not maintain steady flow rates for long enough to reach equilibrium conditions for sediment transport and bed topography.In particular,streams in small watersheds may be subject to rapidly changing hyd
Abkenar open water (AOW) has a 35 km2 distribution and is the largest part of the Anzali Lagoon in the southern coastal zone of the Caspian Sea.The effects of deforestation in the upstream basin of the AOW were assessed by measuring the rate of sedimentat
A series of experiments and simulations were performed to ascertain the rate at which phosphorus is released using a water quality model in Saemangeum Lake,an artificially constructed lake located in an estuary.The general inflow of seawater once a day co
布料器是无钟炉顶的关键设备,其功能是驱动并控制布料溜槽绕高炉中心线的旋转和倾动,以完成高炉不同的布料要求.本文结合酒钢炼铁厂450 m3高炉炉顶布料器的运行现状,对炉顶布料器结构改造,提高了布料器布料精度,降低了介质能源消耗,同时就布料器日常操作维护注意事项提出了要求.
Pollution resulting from terrestrial and aquatic trace elements has become a severe problem across the world.Organic carbon (OC) content has a high affinity for metallic contaminants and it acts as a sig-nificant sink for trace elements.The decomposition
Vegetation uprooting is a complex process which depends on many interrelated factors.In this paper,attention is focused on the flow-induced uprooting in river bends,where the flow characteristics vary as effected by the channel\'s curvature and its cont
结合烧结配料结构、烧结矿成分、工艺生产操作参数与低温还原粉化指数数据的对比分析,研究影响烧结低温还原粉化指数的影响因素.结果表明:烧结矿SiO2、CaO、FeO、MgO的升高有益于低温还原粉化指数的升高,另外生产过程工艺参数(点火温度、主管温度、主管负压、煤气质量)对烧结低温还原粉化指数也有较大影响.
探讨了小方坯在高连浇炉数下脱方的形成原因,通过加强对铜管锥度的测量管理及对铜管规范使用,可调式结晶器水缝控制方式改进为固定式,优化二冷冷却工艺及控制钢水偏流等措施的实施,将脱方率控制在连浇率提高之前的水平.