“快锻压机”要充分发挥其快速特性,就要求有相应的快动作操作机,因此一般指快锻应为压机与操作机配套的机组。此外,这次试验还要求操作机的移动和钳杆传动能自动控制并按压机的要求配合动作,实现快锻机组的联动控制。一、快锻工艺及试验要求快速锻造当精整时,要求锻造次数为100次/分,试验要求为120次/分以上。因此,操作机配合压机进行联合自动锻造时,有以下几点要求。 (一)快速动作 “Fast forging press” to give full play to its fast characteristics, requires a corresponding fast action operating machine, so generally refers to fast forging press and operating machine supporting the unit. In addition, the test also requires the operation of the movement and the clamp lever drive can automatically control and press the request with the action, to achieve rapid linkage control of the unit. First, the rapid forging process and test requirements Forging When finishing, forging times required for 100 times / min, the test requirements of 120 times / min or more. Therefore, the operating machine with the press for automatic joint forging, the following requirements. (A) quick action