【摘 要】
：
The cavitation is directly related to the safety of many large water conservancy projects.There are two types of cavitation bubbles,one is generated by the gas nucleus,called the non gas-beating cavitation bubble,and another is generated by the gas bubble
【机 构】
：
State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University, Chengdu 61006
论文部分内容阅读
The cavitation is directly related to the safety of many large water conservancy projects.There are two types of cavitation bubbles,one is generated by the gas nucleus,called the non gas-beating cavitation bubble,and another is generated by the gas bubble,called the gas-bearing cavitation bubble.They have significantly different collapsing characteristics.This paper studies the cavitation bubbles,generated by a high voltage pulse bubble generation system,and discusses the gas-bearing cavitation bubble\'s characteristics a from the aspects of the collapse process,the cycle,the size and the collapse strength.It is shown that:(1) the collapse of the gas-bearing cavitation bubbles can be divided into two types:the centripetal collapse and the bisected collapse,(2) the cycle period and the size of the gas-bearing cavitation bubble increase significantly,and the increase norm has a certain relationship with the bubble diameter ratio,(3) the collapse strength of the gas-bearing cavitation bubble decreases significantly.The larger the bubble diameter ratio,the greater the effect will be.
其他文献
The presence of bridge piers in natural rivers significantly changes the flow and boundary conditions.As a consequence,ice jams can often be initiated in front of bridge piers.With the changes in flow conditions,two types of ice jam formation may appear:s
A vortex is intuitively recognized as the rotational/swirling motion of fluids,but a rigorous and universally-accepted definition is still not available.Vorticity tube/filament has been regarded equivalent to a vortex since Helmholtz proposed the concepts
An elastic model that combines the dead-end and the orifice at the downstream end is proposed in order to study the hydraulic transients during the rapid filling in small-scale pipelines with submerged outlet.In this model,the unsteady water flow is solve
Based on the computational fluid dynamics (CFD) and the experiment technology, this paper presents a new type of the twin-screw pump for the water-supply and studies its hydraulic performance with the hydraulic performance test. The internal flow characte
The wind turbines in the world\'s highest wind farm with an altitude of over 4 000 m in Naqu county of China were put into operation in 2014.Compared with the wind turbines at lower altitudes,the rated wind speed of these wind turbines are much larger,a
To study the drag reduction of a jet surface,an experiment is conducted with a gyrorotor model.The aim of this study is to analyze the influence of the jet aperture,the jet angle and the rotational velocity coupled with the jet velocity on the friction to
The random walk particle tracking (RWPT) method is compared with the Eulerian methods in investigating pollutant transport in depth-averaged flows.As a typical representative of the Eulerian model with high performance,the MacCormack scheme with Total Var
The paper presents a direct numerical simulation (DNS) for the drag-reducing channel flow using the Giesekus model with variable parameters.It is assumed that the relaxation time in the constitutive equation is varied depending on the local shear rate.The
The unsteady bearing forces of a propeller can be significantly affected by external transverse excitations.This paper numerically studies the unsteady variation characteristics of the bearing forces of a three-blade conventional propeller with external t
The compressible mixing layer is an important physical model to describe the mixing enhancement in scramjet combustors.The downstream coherent structures are normally regarded as the main contribution of the entrainment in the compressible mixing layer.In