机制砂及石粉含量对路面水泥混凝土耐磨性的影响研究

来源 :公路 | 被引量 : 0次 | 上传用户:ixunsoo
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
以天然砂混凝土为基准,对比研究了机制砂以及机制砂中石粉含量、砂率变化对混凝土抗压强度与耐磨性的影响。研究结果表明:随着水灰比降低,无论是机制砂还是天然砂混凝土的抗压强度均逐渐增大,磨耗值逐渐降低。在同等条件下(相同水灰比、相同浆体含量),机制砂混凝土的强度与耐磨性均优于天然砂混凝土。当石粉含量在10%以内时,随石粉含量增加,机制砂混凝土磨耗值显著降低,但当石粉含量高于10%时,机制砂混凝土的磨耗值又略有提高。且随着机制砂混凝土砂率的提高,机制砂混凝土耐磨性下降。 Based on natural sand concrete, the influence of the change of sand content and sand content on the compressive strength and wear resistance of concrete was compared and studied. The results show that with the decrease of water-cement ratio, the compressive strength of both the system sand and the natural sand concrete gradually increases, and the wear value decreases gradually. Under the same conditions (the same water-cement ratio, the same slurry content), the mechanical strength and wear resistance of the sand are better than the natural sand concrete. When the content of rock powder is less than 10%, the wear value of the sand of the mechanism sand decreases obviously with the increase of the content of rock powder. However, when the content of rock powder is higher than 10%, the abrasion value of the sand of the sand system increases slightly. With the increase of the sand rate of the sand, the wear resistance of the sand decreases.
其他文献
面对海量数据的增长,图像分类技术迎来机遇与挑战。深度学习能够很好的解决传统的图像分类方法精度低、耗时长等问题,成为目前主流的图像分类算法。但是深度学习模型结构及其优化算法的实现复杂且效率低,而TensorFlow2.0能够简化和快速实现深度学习模型设计,并在海量数据集上训练模型,备受研究者青睐。首先对图像分类算法、深度学习框架以及TensorFlow2.0进行介绍;然后使用TensorFlow2.
采用气相沉积法在膨胀石墨(EG)层片间生长碳化硅(SiC)晶须,制备出复合材料碳化硅@膨胀石墨(SiC@EG),并通过改变气相沉积的温度(分别为1 200℃、1 300℃、1 400℃)制备出不同
公共图书馆是政府管理、支持、免费为社会公共服务的图书馆,与专业图书馆不同,公共图书馆服务对象从儿童到成人,涉及所有普通居民的信息查阅以及图书阅览,提供通俗读物、期刊
本试验根据John Ellis和Dae S.Song等报道的4对引物建立同时检测猪圆环病毒(PCV2)、猪流行性腹泻病毒(PEDV)、猪传染性胃肠炎病毒(TGEV)、猪轮状病毒(GAR)4种仔猪腹泻相关病毒的复合P