论文部分内容阅读
一、对象选择 我校为满足教学和出版需要,经上级批准建设一家印刷厂。该印刷厂由生产车间和办公楼两部分组成。办公楼为四层,砖混结构。生产车间为三层,框架结构。办公楼和生产车间在平面上连接在一起,结构上设置沉降缝断开。原设计将生产车间沉降缝一侧的框架填充墙设计成一砖半厚的砖墙。建设单位在施工建设中,认为该处设计不尽合理,决定将生产车间沉降缝一侧的框架填充墙作为价值工程的研究对象。
First, the object selection My school to meet the teaching and publishing needs, approved by the higher authorities to build a printing plant. The printing plant consists of two parts, a production workshop and an office building. The office building is a four-story, brick-concrete structure. The workshop is a three-story, frame structure. The office building and the production workshop are connected together in a plane and the settlement joints are set to open. The original design was to design the frame infill wall on the side of the settlement joint of the workshop into a half-brick and half-thick brick wall. In the course of construction, the construction unit thought that the design of the site was not reasonable, and decided to use the frame-filled wall on the side of the settlement joint of the production workshop as the research object of the value engineering.