我厂为了加工如图1所示的导磁碗端面,设计制造了如图2所示的车端面简易不停车快装夹具。 该夹具由定位心轴2和夹紧轴4等组成。使用时,将车床卡盘卸掉,把定位心轴2装入车床主轴锥孔内,再将夹紧轴4装在活顶尖6的顶尖轴上,当工件被顶紧到旋转的定位心轴2的 I plant in order to process the magnetic bowl as shown in Figure 1, designed and manufactured as shown in Figure 2 car simple quick stop fixture. The fixture by the positioning mandrel 2 and clamping shaft 4 and other components. When used, the lathe chuck is removed, the positioning mandrel 2 is loaded into the taper hole of the lathe spindle, and the clamping shaft 4 is mounted on the top shaft of the live center 6. When the workpiece is pressed tightly against the rotating positioning mandrel 2’s