空隙率变化及填充床表面下沉对阴燃传播的影响

来源 :燃烧科学与技术 | 被引量 : 0次 | 上传用户:guaiguainiu1
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
假定阴燃过程中 ,活性物、焦炭和灰三种物质的密度是恒定的 ,但它们各自占固体质量的份额随阴燃而改变 ,确定了阴燃过程固体颗粒的体积收缩速率及填充空隙率变化数学模型。对上方具有空气掠过的水平纤维质填充床 ,从点火到稳态传播的阴燃过程进行了模拟计算。计算结果表明 ,空隙率随阴燃过程增大 ,从而加快了阴燃传播速度 ,提高了其峰值温度。水平填充床表面下沉所引起的固 -固辐射换热在阴燃模拟计算中则可以忽略不计 Assuming the smoldering process, the active material, coke and ash three kinds of material density is constant, but their respective share of the solid mass changes with smoldering, to determine the smoldering solid particle volume shrinkage rate and filling porosity Change mathematical model. A horizontal fiber packed bed with air swept above was simulated by the smoldering process from ignition to steady state propagation. The calculation results show that the porosity increases with the smoldering process, accelerating the smoldering velocity and increasing the peak temperature. The solid-solid radiation heat transfer caused by the sinking of the horizontal packed bed surface is negligible in smoldering simulation
其他文献
本文通过对荣华二采区10
期刊
摘要把基于信号完整性分析的高速数字PCB板设计方法和相对来说比较传统的PCB设计进行对比,文章主要介绍的就是PCB设计的方法,在设计的过程中,先对所有的速度数字信号建立PCB板级信号传输模型,然后对其传输的模型进行设计和分析。  关键词信号完整性;设计的方法;分析模型  中图分类号:TP274文献标识码:A文章编号:1671-7597(2014)11-0054-02  由于集成电路输出的开关速度处
CXY-DASH CAM是一款流线型行车记录仪设计.传统的行车记录仪通常是用一个大的摄像头屏幕连接在许多部件上,如支架和安装框架.CXY-DASH CAM将安装的行车记录仪组件精简成一个
期刊