仿贻贝、导电、超强、组织粘附性的氧化石墨烯水凝胶

来源 :第十一届全国表面工程大会暨第八届全国青年表面工程学术会议 | 被引量 : 0次 | 上传用户:ldfzcc
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Conductive hydrogels are of significant interest for a broad range of applications, including electronic skin, cardiovascular tissue engineering, implantable or wearable biosensors for human health monitoring. This work presented interesting results on a graphene oxide hydrogel based on mussel chemistry. The hydrogel simultaneously possesses the following remarkable properties. The hydrogel had good conductivity (0.1 S/cm) and maintained a stable conductivity during repeatable extension and compression cycles. The hydrogel performs superior mechanical properties with large stretch strain of 3800%, and high toughness of 6870 J/m2, due to the synergistic reinforcing effects of graphene oxide (GO) and polydopamine (PDA) in the hydrogel. The hydrogel could directly self-adhere on human body without additional adhesives. In addition, the hydrogel could self-heal under the ambient environment without other external stimuli, which facilitated it self-healing after unfavorable damage and expand its lifetime in usage. The hydrogel has good biocompatibility, which enhances the flexibility to apply inside human body. By combining those properties, the novel conductive hydrogel has the potential to serve as bioelectronics not only regulating cell activity but also detecting or applying signals in invasive systems contacting with living tissues. Thus, the conductive and self-adhesive hydrogel leads to a new class of implantable and flexible bioelectronics for human body, which is softer and easier to be used. The facile method opens new avenues for the conductive hydrogels with multi-functions to have more practical applications in diverse areas.
其他文献
针对金属陶瓷具有高硬度、高熔点、耐磨损、良好的抗热震性和化学稳定性等特性,通过在低碳钢基体上制备金属陶瓷熔覆层,研究其组织形貌及力学性能。为克服粉末冶金法、自蔓延合成法、化学气相沉积法等工艺带来的缺陷,本文采用等离子弧原位合成的方法,设计不同配比的粉体,原位生成TiC、TiB2型金属陶瓷熔覆层。研究等离子熔覆电流、扫描速度、涂覆厚度、材料配比以及熔池流动性等工艺参数对成形的影响。并对生成物的组织结
H13 steel was treated by arc Plasma Assisted Nitriding with different Nitrogen-hydrogen flow (sccm) ratios of 50:25, 38:38 and 25:50 respectively.The structure phases,deepness,surface morphologies ,cr
本文采用等离子体增强化学气相沉积技术成功制备了不同调制比的多层DLC涂层。利用扫描电子显微镜、原子力显微镜、划痕仪、摩擦磨损试验机及电化学工作站等表征手段评价了不同调制比多层DLC涂层的结构特点、力学性能、摩擦学性能以及耐腐蚀性能。结果 表明:所制备涂层表面光滑、结构致密、膜基界面结合良好。其中1:1为多层DLC涂层最佳调制比,该调制比涂层的硬度、弹性模量和抗裂纹萌生的临界载荷最大。同时,摩擦实验
The Nano-Al2O3 and PEEK particles synergetic filled PTFE composites were prepared by mechanical blending-molding-sintering method. The tribological behavior of composites with different volume fractio
Gearbox is considered as the one of key components of machinery equipment. The security and safety issues are very important for its service performance evaluation and prediction respectively. Frictio
会议
Cu/Ti3SiC2/C/MWCNTs/Graphene nanocomposites were fabricated by vacuum hot-pressing sintering and hot isostatic pressing. Effect of La content on tribological behavior of Cu/Ti3SiC2/C/MWCNTs/Graphene n
硬质陶瓷涂层如TiN、TiSiN等普遍脆性大,易剥落,其增韧研究是当前热点之一。生物护甲材料如牡蛎壳等同时兼具高强度、高韧性的特点,具有优良的抗冲击防护性能,对其强韧特性的研究为硬质陶瓷涂层增韧提供了一条新思路。牡蛎壳由一层厚约300nm的方解石板条层及一层厚约2nm的有机质层相互叠加而成,高硬度的方解石板条层具有较高的硬度,有机质层韧性高,能有效阻止裂纹沿断面的整体穿透,多层结构及有机质层的共同
会议
This paper presented a novel planar electromagnet consisting of a planar copper coil and a magnetic yoke. CoFeB was proposed as magnetic yoke materials, instead of the traditional permanent magnets. T
设计了由环氧树脂WSR618和固化剂DETA构成的涂层材料,以苯乙酸乙脂为芯材采用一步法原位合成脲醛树脂微胶囊,并将苯乙酸乙酯/脲醛树脂微胶囊加入涂层材料。苯乙酸乙酯为修复剂通过溶胀作用,可以实现对环氧树脂涂层的自修复。考察了微胶囊的表面形貌和热稳定性,以及微胶囊含量对涂层自修复性能和电化学性能的影响。研究结果表明,环氧树脂涂层的自修复性能随着微胶囊含量的增加而提高,涂层的阻抗数值也会随之增大。
由于骨质疏松、创伤、肿瘤、感染和其他疾病而使骨丧失了一些骨质,形成较大的间隙,称为骨缺损。长期以来,骨缺损的修复主要采用自体骨或同种异体骨移植的方法,但也存在着自体骨来源有限,异体骨发生免疫排斥等不足。近年来,利用微创手术结合可注射骨修复材料修复骨缺损既克服了传统骨缺损修复的缺点,同时又有着手术风险小、创伤低、费用少等优点,是目前骨科研究的重点。聚多巴胺(PDA)修饰的纳米羟基磷灰石颗粒(HA)具