The kinetics of removal of loss on ignition(LOI) by thermal decomposition of hydrated minerals present in natural iron ores(i.e.,kaolinite,gibbsite,and goethite) was investigated in a laboratory-scale vertical fluidized bed reactor(FBR) using isothermal methods of kinetic analysis.Experiments in the FBR in batch processes were carried out at different temperatures(300 to 1200°C) and residence time(1 to 30 min) for four different iron ore samples with various LOIs(2.34wt% to 9.83wt%).The operating velocity was maintained in the range from 1.2 to 1.4 times the minimum fluidization velocity(Umf).We observed that,below a certain critical temperature,the FBR did not effectively reduce the LOI to a desired level even with increased residence time.The results of this study indicate that the LOI level could be reduced by 90% within 1 min of residence time at 1100°C.The kinetics for low-LOI samples(<6wt%) indicates two different reaction mechanisms in two temperature regimes.At lower temperatures(300 to 700°C),the kinetics is characterized by a lower activation energy(diffusion-controlled physical moisture removal),followed by a higher activation energy(chemically controlled removal of LOI).In the case of high-LOI samples,three different kinetics mechanisms prevail at different temperature regimes.At temperature up to 450°C,diffusion kinetics prevails(removal of physical moisture);at temperature from 450 to 650°C,chemical kinetics dominates during removal of matrix moisture.At temperatures greater than 650°C,nucleation and growth begins to influence the rate of removal of LOI. The kinetics of removal of loss on ignition (LOI) by thermal decomposition of hydrated minerals present in natural iron ores (ie, kaolinite, gibbsite, and goethite) was investigated in a laboratory-scale vertical fluidized bed reactor (FBR) using isothermal methods of kinetic analysis. Experiments in the batch processes were carried out at different temperatures (300 to 1200 ° C) and residence time (1 to 30 min) for four different iron ore samples with various LOIs (2.34 wt% to 9.83 wt% The operating velocity was maintained in the range from 1.2 to 1.4 times the minimum fluidization velocity (Umf) .We observed that below a certain critical temperature, the FBR did not effectively reduce the LOI to a desired level even with increased residence time. The results of this study indicate that the LOI level could be reduced by 90% within 1 min of residence time at 1100 ° C. The kinetics for low-LOI samples (<6% by weight) indicate two different reaction mechanisms in two temperature regimes. At lower temperat the kinetics is characterized by a lower activation energy (diffusion-controlled physical moisture removal), followed by a higher activation energy (chemically controlled removal of LOI) .In the case of high-LOI samples, Three different kinetics mechanisms prevail at different temperature regimes. At temperature up to 450 ° C, diffusion kinetics prevails (removal of physical moisture); at temperature from 450 to 650 ° C, chemical kinetics dominates during removal of matrix moisture. 650 ° C, nucleation and growth begins to influence the rate of removal of LOI.