论文部分内容阅读
(1)漏油装载机驱动桥漏油有3种可能:一是轮边减速器内侧渗漏齿轮油;其原因是骨架油封或O形密封圈损坏,此时应更换骨架油封及O形密封圈。二是主传动器与桥壳结合的法兰面处渗油;原因是固定两者的螺栓松动或石棉纸垫损坏,此时应紧固连接螺栓或更换石棉纸垫。三是驱动桥壳体渗油;原因一般是驱动桥壳存在铸造缺陷,此时应补焊或更换驱动桥壳体。(2)异响装载机驱动桥出现异响原因比较多,主要有以下2种可能:一是主传动器齿轮啮合间隙和轴承间隙调整不当;此时应拆解主传动器,重新调整齿轮啮合间隙和轴承间
(1) Oil Leader Loader Drive Oil Leakage There are 3 possible: First, the inside of the wheel gear reducer leakage of oil; the reason is the skeleton oil seal or O-ring damage, this time should replace the skeleton oil seal and O-ring seal ring. The second is the main actuator and the bridge shell flange surface bleed oil; the reason is that the bolts of both loose or asbestos paper pad damage, this time should be fastened bolts or replace the asbestos paper pad. Third, the axle housing oil leakage; the reason is that there is casting drive casting shell defects, this time welding repair or replace the axle housing. (2) There are many reasons for the abnormal noise in the driving axle of abnormal sound loaders. There are mainly two kinds of possible abnormalities. One is that the gear meshing clearance and the bearing clearance in the main actuator are improperly adjusted. At this time, disassemble the main actuator and readjust the gear meshing Clearance and bearing