3.95W高功率超连续光谱产生的实验研究

来源 :中国激光 | 被引量 : 0次 | 上传用户:YenLoveRicky
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
利用掺镱大模场面积光子晶体光纤飞秒激光放大器作为抽运源,在高非线性光子晶体光纤中产生了可见光波段增强的超连续光谱。光纤色散曲线经过特殊设计,使得红移孤子波与可见光波段蓝移色散波群速度匹配更好,在光纤中同时传输,并通过四波混频持续发生相互作用,提高了超连续光谱中的可见光成分。实验得到了3.95 W的高功率超连续输出,其中可见光波段占1.2 W。进一步数值模拟表明,增大光纤空气填充率和减小纤芯直径可以增强孤子波与色散波的互作用,使光谱的可见光成分得到进一步增强。 The use of ytterbium-doped large-mode-area photonic crystal fiber femtosecond laser amplifier as a pump source produces a supercontinuum spectrum with enhanced visible band in a highly nonlinear photonic crystal fiber. The fiber dispersion curve is specially designed so that the redshifted soliton wave matches the blue shifted dispersion group in the visible band faster and simultaneously propagates in the fiber and continues to interact through the four-wave mixing to improve the visible light in the supercontinuum spectrum ingredient. Experiments have been 3.95 W high-power supercontinuum output, of which visible light band accounted for 1.2 W. Further numerical simulation shows that increasing the air-filled rate of the fiber and decreasing the core diameter can enhance the interaction between the soliton wave and the dispersive wave so that the visible light component of the spectrum is further enhanced.
其他文献
为了获取完整且大面积的印刷电路板(PCB)光电图像,在淡入淡出的自然缝合算法的基础上,提出了一种基于硬件的图像自动拼接新算法,并分析了其基本原理。选择用中值滤波滤除图像
以平行向列相液晶作为缺陷层设计了一种可调谐光子晶体滤波器。采用4×4矩阵方法,对其光学特性和本征偏振态进行了理论分析。结果表明,电压较低时,存在两种本征透射模式,