论文部分内容阅读
1.○形密封圈安装要点O形密封圈分为连续式、非连续式及拼合式3种形式。其中连续式O形密封圈是圆形截面且无接口的密封圈;非连续式O形密封圈是将圆形截面的密封胶条切割为所需长度,其2个端面不用粘合在一起,放置在安装槽内形成的密封圈;拼合式O形密封圈是将圆形截面的密封胶条切割为所需长度,将其2个端面粘合在一起后,所形成的密封圈。(1)连续式O形密封圈连续式O形密封圈安装前,应确保O形密封圈安装槽内没有杂物,确保安装槽的边缘和端部没有划痕、擦伤和毛刺,安装时可用胶带覆盖台肩、
1. ○ O-ring installation points O-ring is divided into continuous, non-continuous and split three kinds of forms. One continuous O-ring is a circular cross-section and no interface ring; non-continuous O-ring is a circular cross-section of the sealing strip is cut to the desired length, the two ends do not have to be bonded together, Placed in the mounting groove formed seal ring; Split O-ring is a circular cross-section of the seal strip is cut to the desired length, the two end faces of the adhesive together, the resulting seal ring. (1) Continuous O-ring Continuous O-ring Before installation, make sure that there is no debris in the O-ring mounting groove to ensure that there is no scratches, scratches and burrs on the edges and ends of the mounting groove. During installation Tape can be used to cover the shoulder,