低速轴流风扇格尼襟翼气动作用实验与数值研究

来源 :工程热物理学报 | 被引量 : 0次 | 上传用户:edgesoft_h
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文通过实验的方法研究了低雷诺数轴流风扇中格尼襟翼的气动作用.风扇叶片压力面尾缘加装高度分别为1.25%、2.5%和5%弦长的Gurney襟翼,与原始风扇性能进行对比.结果表明,风扇加装格尼襟翼之后,风扇工作失速点基本保持不变,但是襟翼风扇工作范围有所扩大,风扇的额定工况点朝着大流量方向移动.相同流量下,风扇加装格尼襟翼能提高风扇压升,且格尼襟翼的高度越高,压升提高的幅度越大.“,”Experiments and numerical simulations are conducted to investigate the influence of Gurney flap on the aerodynamic performance of the low speed axial turbine with four different heights of GFs,such as 0.0% chord,1.25% chord,2.5% chord and 5% chord,fixed on the trailing edge of the airfoil.The experimental results show that the fans equipped with GFs have the wider operating range,and the best operation point is toward the larger flow rate.Under the same flow-rate condition,the installation of GFs can improve the work capacity of the fan.The higher GF installed on the fans,the higher total pressure head can be obtained.
其他文献
随着三维作品不断在荧幕上被追捧,三维软件的普及率也在不断提升,尤其自2014年全国职业技能大赛"动漫"赛项改革为纯三维技能竞赛后,各高职院校更加重视了三维课程的开设与改革。Maya作为目前世界上最为强大的三维软件之一,在高职动漫专业课程体系中占有核心地位。由于软件与技术的更新换代之快,Maya课程的信息化教学设计也必须紧跟信息化发展的步伐,如何充分利用信息化手段促进翻转式课堂的实施与成效,是目前高