论文部分内容阅读
该万能压弯模(见附图)可用于各种不同断面尺寸零件(料厚为1～5mm,长为10～1000mm,宽为20～100mm_,高达65mm)的压弯成型,它安装在单动式曲柄压力机(1000kN)上。这种模具经重新调整后,可压弯成型24种零件, 可移动的阴模11和限位板4固定在模具的底座1上。可移动板10由螺栓9固定在阴模上,用于被压弯件沿宽度方向上定位。推杆座3和弹簧2安装在模具底座的纵向槽内,可换顶料杆5固定在推杆座上。上模座7具有一个供安装所有快换冲头6的配合孔和柄
The universal bending die (see photo) can be used for compression molding of various cross-sectional parts (thickness 1 ~ 5mm, length 10 ~ 1000mm, width 20 ~ 100mm_, up to 65mm) Mobile crank press (1000kN). After the mold is readjusted, 24 parts can be press-formed, and the movable mold 11 and the stopper 4 are fixed on the base 1 of the mold. The movable plate 10 is fixed to the female mold by a bolt 9 for positioning in the width direction by the bended member. The push rod seat 3 and the spring 2 are installed in the longitudinal groove of the mold base, and the ejector rod 5 is fixed on the push rod seat. The upper die holder 7 has a fitting hole and a shank for mounting all of the quick release punches 6