论文部分内容阅读
利用优化的涂覆铸造工艺，在灰铸铁表面复合 ＷＣ增强相－高铬铸铁耐磨材料的基础上，对复合材料的磨粒磨损特性进行了试验研究。结果表明，与淬火态６５Ｍｎ钢、４５钢相比，复合材料的耐磨性提高幅度较大；但复合材料中的增强相含量有一最佳值，因只有增强相与高强度基体结合牢固，才能充分发挥增强相抵抗磨粒犁削的潜力。
On the basis of the WC reinforced phase - high chrome cast iron wear-resistant material on the surface of gray cast iron, the abrasive wear characteristics of the composite were studied by the optimized coating casting process. The results show that compared with the hardened steel 65Mn and steel 45, the wear resistance of the composites increases greatly. However, the content of the reinforcing phase in the composite material has an optimum value because only the combination of the reinforcing phase and the high strength matrix can be firm Give full play to enhance the potential to resist abrasive plowing.