石墨矿石中低含量固定碳测定方法的改进

来源 :化学工程与装备 | 被引量 : 0次 | 上传用户:hgs26
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
试样经500℃灼烧1h除去有机碳,滴加5%磷酸除去碳酸盐,在氧气流中经1000℃灼烧,将产生的气体先通入碘化钾—碘酸钾溶液中除去硫,然后再将气体通入异丙醇—乙醇—二乙稀三胺吸收液吸收,以百里香酚酞为指示剂,用乙醇钾标准溶液滴定测得固定碳的量。方法检出限为0.03%,线性范围为0.10%—20%,经国家一级标准物质GBW03118和GBW03119验证,测定的准确度和精密度均满足规范要求,本方法可以准确测得石墨矿石中低含量固定碳的量。 The sample was calcined at 500 ℃ for 1h to remove the organic carbon, 5% phosphoric acid was added dropwise to remove the carbonate, which was then heated at 1000 ° C in an oxygen stream to remove sulfur from the potassium iodide-potassium iodide solution Then the gas is passed through an isopropanol-ethanol-diethylenetriamine absorbing solution to absorb thymolphthalein as an indicator, and the amount of fixed carbon is measured by titration with a standard solution of potassium ethoxide. The detection limit of the method is 0.03%, and the linear range is 0.10% -20%. The method has been verified by national standard GBW03118 and GBW03119. The accuracy and precision of the method meet the requirements of the standard. Amount of fixed carbon.
其他文献