【摘 要】
:
In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonli
论文部分内容阅读
In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem, an adaptive fuzzy predictive functional control (AFPFC) scheme for multivariable nonlinear systems was proposed. Firstly, multivariable nonlinear systems were described based on Takagi-Sugeno (T-S) fuzzy models; assuming that the antecedent parameters of T-S models were kept, the consequent parameters were identified on-line by using the weighted recursive least square (WRLS) method. Secondly, the identified T-S models were linearized to be time-varying state space model at each sampling instant. Finally, by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established. The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015; the tracking ability of the proposed AFPFC is superior to that of non-AFPFC (NAFPFC) for pH process without disturbances, the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC; when the process parameters of AFPFC vary with time the integrated absolute error (IAE) performance index still retains to be less than 200 compared with that of NAFPFC.
其他文献
Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900 ℃ in air. Scanning electron microsco
CdGd2(WO4)4-δ single crystal was grown using the Czochralskis method. The crystal structure was tetragonal scheelite with lattice parameters a=b=0.5203 nm and
Ceramic microspheres were prepared by using Chinese bauxite as raw materials through the centrifugal spray drying method. The control technology of microsphere
Ni-W-P-CeO2-SiO2 nano-composite coatings were prepared on the carbon steel surface by pulse co-deposition of nickel, tungsten, phosphorus, nano-CeO2 and nano-Si
Investigation into the magnets with different squareness of hysteresis loop (SHL) reveals that the microstructure of sintered NdFeB magnets has great effects on
A novel method was applied to the surface modification of the metal hydride(MH) electrode of MH/Ni batteries. Both sides of the electrode were plated with a thi
Conducting blends of polyacrylonitrile (PAN) copolymer and dodecylbenzene sulfonic acid doped polyaniline (PANI-DBSA) were prepared by solution blending of the
Hollow spheres of hexagonal ferrite BaCo2Fe16O27 were fabricated through a spray pyrolysis technique using co-precipitation ferrite powder precursor as material
The production of MoO_3 from Sarcheshmeh molybdenite concentrate via a pyro-hydrometallurgical process was studied.The molybdenite concentrate and sodium carbon
Structural changes for mechanically activated pyrite, sphalerite, galena and molybdenite with or without the exposure to ambient air, were systematically invest