【摘 要】
：
By liquid metal cooling(LMC)process,the Ni-43Ti-4A1-2Nb-2Hf(％,atomic fraction)alloy was directionally solidified(DS).The microstructure and tensile properties at
【机 构】
：
School of Materials Science and Engineering
【基金项目】
：
This work was financially supported by the National Natural Science Foundation of China
论文部分内容阅读
By liquid metal cooling(LMC)process,the Ni-43Ti-4A1-2Nb-2Hf(％,atomic fraction)alloy was directionally solidified(DS).The microstructure and tensile properties at room and elevated temperature were investigated.It was found that the DS process significantly improves the room temperature tensile strength,increasing by 70％ compared with the as-cast alloy.After appropriate heat treatment(HT),the average tensile strength reaches above 1900 MPa,nearly twice of the as-cast one.At 800 and 900 ℃,the tensile strengths are about 308 and 169 MPa,respectively.
其他文献
A newly developed heuristic global optimization algorithm,called gravitational search algorithm (GSA),was introduced and applied for simultaneously coordinated
This paper experimentally studies the tensile deformation behavior of polycarbonate (PC),acrylonitrile-butadiene-styrene (ABS),and PC/ABS blends (with the blend
In order to enhance the corrosion resistance of 304 stainless steel,niobium was electrodeposited on its surface in air- and water-stable ionic liquids.The elect
Bulk Mn1.2Fe0.8P0.76Ge 0.24 alloy was prepared by mechanical milling and subsequent spark plasma sintering technique.Effect of annealing on the structure and ma
The hot deformation characteristics of as-cast nickel-base superalloy GH742y after hot isostatic pressing (HIP)(hereafter referred to as-cast alloy) have been i
The influence of aging treatment on transformation behavior and shape memory of the Ti50-xNi48Fe2Nbx(x=0,0.6,0.8,1.0,and 1.2)alloys was investigated using diffe
Surface roughness and shape play an important role on the behavior of particles in various processes such as flotation. In this re-search, the influence of diff