论文部分内容阅读
1.驱动盘结构T165型推土机传动系统驱动盘的作用是将转向离合器的动力传递给最终传动箱,再由最终传动箱驱动履带使推土机行驶。驱动盘安装结构如图1所示。其主要由驱动盘1、齿轮轴2、轴头螺母3、轴承4、轴承座5、后桥箱6和油封7等组成。驱动盘1与齿轮轴2采用花键连接,二者的花键具有一定的锥度。将轴头螺母3拧紧后,既可防止驱动盘1轴向窜
1. Drive plate structure T165 bulldozer drive system drive plate is the role of the steering clutch power transmission to the final gearbox, and then by the final gearbox to drive the bulldozers driving. Drive plate installation structure shown in Figure 1. The utility model is mainly composed of a driving plate 1, a gear shaft 2, a shaft nut 3, a bearing 4, a bearing seat 5, a rear axle box 6 and an oil seal 7. Drive plate 1 and gear shaft 2 spline connection, the two splines have a certain degree of taper. Tighten the shaft nut 3, both to prevent the drive plate 1 axial channeling