以武钢炼钢总厂某分厂连铸车间现有设备为基础,制定中间包自动开浇自动调速程序控制思路,并进行不同钢种不同拉速的自动调速试验。试验结果表明,自动调速程序在线调速成功并满足工艺要求,为实现连铸“一键开浇”自动化奠定了基础。 Based on the existing equipment of a continuous casting plant of a factory in WISCO, a tundish automatic control program for automatic control of pouring speed was made and automatic speed control tests with different pull rates of different steels were carried out. The test results show that the on-line speed regulation of the automatic speed regulation program is successful and satisfies the technical requirements, which lays the foundation for realizing continuous casting and one-key pouring automation.