【摘 要】
：
The corrosion behavior of stainless steel exposed to a simulated salt lake atmosphere has been investigated by analyzing the evolution of surface morphologies and corrosion products,the initiation and development of pits,and the electrochemical characteri
【机 构】
：
Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110016, China;School of Materials
论文部分内容阅读
The corrosion behavior of stainless steel exposed to a simulated salt lake atmosphere has been investigated by analyzing the evolution of surface morphologies and corrosion products,the initiation and development of pits,and the electrochemical characteristics.The results indicated that (Mg6Fe2(OH)16(CO3)(H2O)4.5)0.25,a layered double hydroxide,has been detected for the first time in the corrosion products formed on stainless steel exposed to a simulated salt lake atmosphere.The specimens exposed to MgCl2 deposit conditions were corroded more severely than those exposed to NaCl deposit conditions,which was attributed to the differences in the deliquescence relative humidity and efflorescence relative humidity values of MgCl2 and NaCl.In addition,a special corrosion morphology consisting of a concentric circle of yellowish material was observed on the specimens exposed to MgCl2 deposit conditions,which was attributed to the formation of Mg(OH)2,inhibiting the diffusion and migration of OH-ions to the anode region.The maximum pit depth followed a power function with respect to corrosion time.The corrosion mechanism of stainless steel exposed to a simulated salt lake atmosphere is also discussed.
其他文献
This paper clarifies two issues related to the prior cathodic polarisation treatment (PCPT) for the potentiodynamic polarisation test: whether PCPT can (1) remove the air-formed surface film and (2) affect the polarisation test results.X-ray photoelectron
A new method for evaluating the compactness of rust layers on steels has been proposed in the present study.The method includes adsorption and dehydration process of anhydrous ethanol.The protective ability of rust layers can be qualitatively reflected by
Electron diffraction was used to study the local atomic structure of Cu49Hf42Al9 metallic glasses (MGs).The amorphous nature of the MG was fully retained after the compression test.The partial radial distribution functions (PRDFs) of the MG structure obta
The effect of grain size on the mechanical properties of a high-manganese (Mn) austenitic steel was investigated via electron-backscattered diffraction,transmission electron microscope,X-ray diffraction,and tensile and impact tests at 25 ℃ and-196 ℃.The H
Sandwich-like Al/Ti/Al-laminated composites have many advantages such as low density and high specific strength with value in mechanical manufacturing and aerospace engineering.Here,Al/Ti/Al-laminated composites were fabricated by hot roll bonding and sub
Inadequate strength at the bone/cement interface is one of the main drawbacks of poly(methylmethacrylate) (PMMA) bone cement in the current orthopedic surgeries.In the present work,a partially degradable PMMA/Mg composite bone cement (PMC) was developed f
The microstructure,electrical conductivity and electromagnetic interference shielding effectiveness of Mg-X (X=Al,Sn,Y and Gd) alloys in as-cast and solution states were systematically investigated in this study.The electrical conductivity and electromagn
The thermal stability and mechanical properties of China low activation martensitic steel with Zr and Y were investigated via thermal aging at 550 ℃ for 8000 h.The Laves phase content monotonically increased with thermal aging,and the volume fraction of t
The hot deformation behavior and workability of a new reduced activation ferritic/martensitic steel named SIMP steel for accelerator-driven system were studied.The flow curve and its microstructure were studied at 900-1200 ℃ and strain rate range of 0.001
Carbon nanofiber (CNF)-reinforced aluminum-matrix composites were fabricated via ball milling and spark plasma sintering (SPS),SPS followed by hot extrusion and powder extrusion.Two mixing conditions of CNF and aluminum powder were adopted:milling at 90 r