论文部分内容阅读
一、系统操作1(1)按下钥匙解锁键一次仅解锁驾驶员侧车门和车内灯点亮,钥匙如图1所示。(2)在5s内按下钥匙解锁键两次解锁全部车门。(3)当车辆锁止后,车内灯熄灭。(4)当车速超过15mile/h时,车门自动锁止。(5)警报/中控锁功能可使用钥匙进行更改。二、钥匙编程1.当出现以下情况时,需进行重新编程增加或更换钥匙。2.编程方法注意:必须有一把已经编程的有效钥匙来操作以下步骤。(1)获取所有需要编程的钥匙。(2)进入车内,关闭所有车门。(3)打开点火开关。(4)用已编程的钥匙做如下操作:①按下并按住钥匙解锁键。
First, the system operation 1 (1) Press the key to unlock the key to unlock only the driver’s side doors and interior lights, the key shown in Figure 1. (2) Press the key unlock key twice within 5s to unlock all the doors. (3) When the vehicle is locked, the interior lights turn off. (4) When the speed exceeds 15mile / h, the door is automatically locked. (5) Alarm / Central lock function can be changed using the key. Second, the key programming 1. When the following situations occur, need to reprogram to add or replace the key. 2. Programming Method Note: You must have a valid key that has been programmed to operate the following steps. (1) Get all the keys you need to program. (2) into the car, close all the doors. (3) Turn on the ignition switch. (4) Use the programmed key to do the following: ① Press and hold the key to unlock.