论文部分内容阅读
装甲兵工程学院协助山东齐鲁石化公司,成功地进行了一次大面积镀银试点。齐鲁石化公司30万吨乙烯工程是国家重点建设项目,该公司氯碱厂的烧碱生产设备是由日本设计制造的,由于日方在设计计算中的失误,将造成烧碱生产中,电解槽汇流铜排的实际工作温度超过设计允许最高温度。这一问题被我国有关部门发现后,与日方进行了严肃认真的谈判。为降低汇流铜排温升,可以采取减小通电流的方法,但这将直接影响烧碱产量,使设备不能充分发挥效益,使我国长期蒙受经济损失,这是绝对不允许的。也可采取在汇流铜排接头部位
The Armored Forces Engineering Institute assisted Shandong Qilu Petrochemical Company to successfully conduct a large-scale silver plating pilot project. The 300,000-ton ethylene project of Qilu Petrochemical Company is a national key construction project. The caustic soda production facility of the company’s chlor-alkali plant is designed and manufactured by Japan. Due to mistakes in the design calculation, the Japanese company will cause caustic soda production, and the electrolysis tank confluence copper bars. The actual operating temperature exceeds the design maximum temperature allowed. After this issue was discovered by the relevant departments of our country, it carried out serious and serious negotiations with the Japanese side. In order to reduce the temperature rise of the bus copper, it is possible to adopt a method to reduce the current, but this will directly affect the output of caustic so that the equipment can not fully play the benefits, so that China has long suffered economic losses, which is absolutely not allowed. Can also be taken at the busbar connector