Application of Glass Sealant for SOFC

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:w7622420
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Glass and glass-ceramic materials were investigated as SOFC seals at 800 ~ 850 ℃. The material was based on the glass and glass-ceramic in the BaO-CaO-Al2O3-SiO2-La2O3-B2O3 system. The sealant has a minimum thermal expansion mismatch with yttria-stabilized zirconia (YSZ)electrolyte and Ni/gYSZ for the anode. The sealant has a superior stability during the process of operation in SOFC and can withstand thermal shock during the process of thermal cycling. The results show that the BaO-CaO-Al2O3-SiO2-La2O3-B2O3 system sealant can be used as sealing materials for SOFC.
其他文献
A new concept of salt core, a melting temperature of which is lower than the solidus temperature of cast alloy,was introduced to produce an integrated casting p
In order to improve the in-flight characteristics of the atomizing droplets during high velocity wire arc spraying (HVAS), some changes have been operated on th
The content of zirconia has a remarkable influerce on transformation behavior and mechanical properties of Al2O3/ZrO2 (2Y) composites. When 15% and 20% ZrO2(2Y)
In the present work investigations have been made to see the role of metal oxides on the performance of the silver metal oxides electrical contact materials. Si
Recent research activities on the formation of micro-defects and porosity in organic coatings were reviewed. The mechanisms of aggressive ionic conduction throu
The oxidation of specimens with thermal barrier coating (TBC) consisted of nickel-base superalloy, low-pressure plasma sprayed Ni-28Cr-6Al-0.4Y (wt pct) bond co
The n-SiO2/Ni composite electro-brush plating coating was prepared on the 1045 steel substrate. SEM and TEM were utilized to analyze the surface and cross-secti
In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the
The influence of surface pre-treatments, shot-peening (SP) and laser remelting (LR), on oxygen permeation behaviors of titanium alloy TC11 was investigated. Opt
Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface