【摘 要】
：
A facile modification strategy is developed to promote the proliferation and osteogenic differentiation of rat bone marrow stromal cells (rBMSCs) through deposition of a bioactive calcium silicate (CS) coating on the porous surface of poly (ether-ether-ke
【机 构】
：
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Biomedical Materi
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A facile modification strategy is developed to promote the proliferation and osteogenic differentiation of rat bone marrow stromal cells (rBMSCs) through deposition of a bioactive calcium silicate (CS) coating on the porous surface of poly (ether-ether-ketone) (PEEK) with the assistance of poly(dopamine) (PDA). The porous structures are etched on the surface of PEEK after sulfonation treatment. A poly(dopamine) layer is coated on the porous surface of the sulfonated PEEK (SPEEK), which provides anchoring groups for the subsequent deposition of the CS layer. Results show that the CS coating on the porous surface of SPEEK significantly improve the hydrophilicity and biomineralization formation of hydroxyapatite. Compared with PEEK, SPEEK-PDA-CS displays higher bioactivity to promote the proliferation and osteogenic differentiation of rBMSCs, including the increase of ALP activity and formation of calcium nodules, the expression of osteogenic differentiation-related genes. These results are beneficial to extending clinical applications of PEEK-based implants for bone tissue repair and orthopedic surgery.
其他文献
Taking a Cu55Ni45 alloy as experimental alloy systems, we systematically studied the method of obtaining deep undercooling of alloy melt. Stable deep undercooling of alloy melt was obtained by the combination of molten glass purification and cyclic overhe
A hyperbranched epoxy (AHEP) resin with terminal allyl groups was synthesized. The number average molecular weight of the synthesized AHEP is 1260, the multi-dispersion coefficient is 1.88, and the branching degree is 0.9. The hyperbranched epoxy resin an
Both experimental and numerical approaches were used to study dynamic failure properties and patterns of flattened Brazilian discs, containing two prefabricated cracks intersected at a varying angle. Mechanism of crack initiation, propagation, and cut-thr
This article explores the effects of doping ferroelectric materials MgTiO3 with different proportions on the properties of polyaniline (PANI). PANI / MgTiO3 composites were prepared by in-situ composite method. Fourier transform infrared spectroscopy (FTI
Hollow silica nanospheres with radical pore on the surfaces were prepared using the assemblies of valine amphiphilic small molecule and benzene as double-templates through sol-gel method in tetramethylammonium hydroxide (25wt%) solution at the stirring ra
High entropy alloys (HEAs) possess good mechanical properties and a wide range of industrial applications. In this paper, phase formation prediction theory, microstructure, properties and preparation methods of light-weight HEAs (LWHEAs) were reviewed. Th
Through the influence of the dosage of culture solution and calcium source on hardness and compressive strength of samples, the formulation of microbial cementitious materials was optimized and defined. The influence of temperature on composition, microst
We demonstrate a 2205 duplex stainless steel (DSS) synthesized by aluminothermic reaction and followed two-step rolling which had a superior yield strength of 863 MPa, ultimate tensile strength of 1103 MPa and an elongation of 21％ at room temperature. The
The active oxygen species in the catalytic oxidation system of Fe(Ⅲ)PcTs-t-BuOOH were identified, and the mechanism of the catalytic oxidation of phenolic substrates was proposed. Quinone imine molecules, the main products of catalytic oxidation reaction,
The changes of the microstructure and the mechanical properties of FeCrMoCBY amorphous coatings prepared by plasma spraying after heat treatment were investigated. 300, 400, 500 and 600 ℃ were selected as the heat treatment temperature, and the crystalliz