本文我将来谈紧急情况下飞手的正确处理方式。对于入模已久的模友来说,这是一个既沉重又无法避免的问题。电子产品时常会因为电子、机械或是环境引起故障,突发一些紧急情况,尤其是在留空时的紧急情况,如果处理不当,轻者损失飞行设备,重者事关人命。当然,最好的方式就是在平常的维护中或者起飞前的准备中排查一切隐患。如果这些都做好了,依然有突发状况,就只有沉着冷静采取正确的处理方式尽量减少损失。首先在处理过程中我们必须遵从一个原则“以人为本”。在主次上,一要保证不伤到人,哪怕飞机沉入大海血本无归;二要尽量不妨碍公共安全,例如迫降地尽量远离公路、广场等人类密集活动范围;三要选择草地、沙地等具有缓冲作用的场地迫降,减少飞行平台的损失,保护储存卡。 This article I will talk about the correct handling of flying hand in an emergency situation. This is a heavy and unavoidable problem for die-lovers who have long been in the mold. Electronic products often cause problems due to electrical, mechanical or environmental problems. Some emergency situations are unexpected, especially in emergency situations when they are left blank. If handled improperly, the light ones will lose their flying equipment and the heavy ones will be life-threatening. Of course, the best way is to troubleshoot all the pitfalls in normal maintenance or before take-off. If these are done, there are still unexpected situations, only calm down and take the right approach to minimize losses. First, we must follow the principle of “people-oriented” in the process of handling. In the primary and secondary, we must ensure that people will not be hurt, even if the plane plunges into the sea and plunges into the sky. Second, try not to hinder public safety, for example, to land as far as possible from crowded roads, squares and other human activities. Third, we must choose grass, sand Land and other places with a buffer landing pressure to reduce the loss of the flight platform to protect the memory card.