【摘 要】
：
Oleic acid surface-modified Cu nanoparticles with an average size of 20 nm were prepared by liquid phase reducing reaction. The tribological performance and mec
【机 构】
：
National Key Laboratory for Remanufacturing
论文部分内容阅读
Oleic acid surface-modified Cu nanoparticles with an average size of 20 nm were prepared by liquid phase reducing reaction. The tribological performance and mechanism of nanocopper as additive were studied by means of tribotester, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and nanoindentation instrument. The results indicate that the modified nanocopper additive can significantly improve the wear resistance and reduce friction coefficient of base oil. A copper protective film is formed and contributes to the excellent tribological properties of nanocopper additive. On the basis of the film forming mechanism, a new in-situ repair method was designed and used to repair wear-out-failure injection pump plunger and barrel. Furthermore, the current research progress of nanoparticles as green energy-saving lubricating oil additives were presented.
其他文献
A new method was proposed to directly measure the effective resistance and distinguish the porous frequency in the regenerator of the microminiature thermoacous
采用一种针对大规模复杂数据的分析技术--符号数据分析方法(Symbolic Data Analysis 简称SDA),以中信证券风格指数作为研究对象,对2002年中国股票市场的财务指标与市场表现进
The 2-dimensional cellular automata (CA) simulation technique has been utilized to investigate the abnormal grain coarsening. The growth of abnormal grains is m
Three approaches of treating carbon nanotubes (CNTs) including acid treatment, air oxidization and heat treatment at high temperature were studied to enhance th
To acquire a knowledge of the stress-strain state in the process of mining beforehand, a numerical method was used to simulate the stoping process of access mec
SO2-4/TiO2-WO3 was prepared and its catalytic activity under different synthetic conditions was discussed with esterification of n-butanoic acid and n-butyl alc
The improved ERICA algorithm for ABR flow congestion control is presented based on available bandwidth prediction using the BP neural networks in ATM networks.