论文部分内容阅读
Laser-Induced Phase Transformation in Chalcogenide Glasses Investigated by Micro-Raman Spectrometer
【机 构】
：
Laboratory of Infrared Materials and Devices , Advanced Technology Research Institute , Ningbo Unive
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2014年1期
其他文献
TiO2 was employed as the waste form for disposal of simulated nuclide Sr. Preparation of Sr bearing rutile was explored under different sintering temperatures and Sr contents. The optimal treatment temperature was confirmed as 1 300 ℃ for the incorporatio
A Controllable Synthetic Route for Preparing Graphene-Cu and Graphene-Cu2O Nanocomposites Using Grap
The development of convenient method to obtain graphene-based nanocomposites is a key issue for their application. Herein, we described a facile route for synthesizing graphene-Cu and graphene-Cu2O nanocomposites using graphene oxide-CuO as a precursor. R
Effects of Aluminum Doping on the Microstructure and Electrical Properties of ZnO-Pr6O11-Co3O4-MnCO3
Production of Poly-β-hydroxybutyrate by Activated Sludge in Sequencing Batch Reactor under Aerobic C
In order to improve poly-β-hydroxybutyrate (PHB) production in activated sludge,the anaerobic/aerobic alternative operating sequencing batch reactor (SBR) process was applied in this paper to accumulate PHB.Effects of nutritional conditions and carbon con
Mechanical Behavior and Microstructure Characterization of 3D Stitched Quartz Fibers-reinforced Sili
Service life of reinforced concrete structures usually was designed on the basis of one selected deteriorating mechanism as for instance carbonation, chloride penetration, and frost action. It could be shown in the meantime by numerous authors, however, t
Glassfi ber reinforced plastics geogrid has a wide application in thefi eld of soil reinforcement because of its high strength, good toughness, and resistance to environmental stress, creep resistance and strong stability. In order to get high-powered gla
Epoxy/graphene nanoplatelets (GNPs) powder coatings were fabricated using ultrasonic pre-dispersion of GNPs and melt-blend extrusion method. The isothermal curing kinetics of epoxy/GNPs powder coating were monitored by means of real-time Fourier transform
The thermodynamic phase stability area diagrams of BCl3-NH3-SiCl4-H2-Ar system were plotted via Factsage software to predict the kinetic experimental results. The effects of parameters (i e, partial pressure of reactants, deposition temperature and total