论文部分内容阅读
1前言前西德产的PFSU型万能齿轮测量仪的板状零件表面,要求有2条或3条宽16~18mm的淬硬带。如尺寸为354×112×25mm的顶板,平面上有2条宽16mm,长354mm的淳硬带。扳平面淬火后弯曲变形量达到了0.5~0.8mm,超过了平面弯曲度≤0.30mm的技术要求。本文预想采用如下几种方法
1 Introduction Pre-West Germany PFSU universal gear measuring plate parts surface, requiring two or three wide 16 ~ 18mm hardened zone. Such as the size of 354 × 112 × 25mm of the roof, the plane has two width 16mm, length 354mm Chun-band. Plane quenching after bending deformation reached 0.5 ~ 0.8mm, exceeding the plane bending ≤ 0.30mm technical requirements. This article envisions the following methods