论文部分内容阅读
在完成2010款科鲁兹车自动变速器控制模块在线编程(具体操作方法参见本刊2017年第4期《2010款科鲁兹车自动变速器控制模块在线编程操作方法》一文)后,需对自动变速器控制模块执行配置与设定,具体操作方法如下。(1)连接元征X431 PAD III,接通点火开关。(2)依次选择“中国通用V49.15→配置与设定”(图1)。(3)根据系统提示进入“变速器快速读取适配”界面,并依次完成清洗离合器(图2)、驾驶校准测试(图3)、倒挡校准测试(图4)等步骤。
After completing the 2010 Keluzi automatic transmission control module online programming (specific methods of operation see the 4th issue of 2017 “2010 Section Cruze automatic transmission control module online programming method of operation,” a text), the need for automatic transmission control module configuration And set, the specific method of operation is as follows. (1) Connect the levy X431 PAD III, turn on the ignition switch. (2) Select “China General V49.15 → Configuration and Settings” (Figure 1). (3) According to the system prompt, enter the interface of “quick read fit transmission”, and then complete the steps of cleaning the clutch (Figure 2), driving calibration test (Figure 3), reverse gear calibration test (Figure 4)